# Set up advice for blind user

**URL:** <https://gpdsupport.com/t/set-up-advice-for-blind-user/242>\
**Category:** Support & Help Requests\
**Created:** [September 5, 2019, 9:08am UTC](https://gpdsupport.com/t/set-up-advice-for-blind-user/242 "2019-09-05T09:08:57Z")\
**Posts on this page:** 1\
**Showing post:** 10

<div class="post-metadata">

**Author:** ![petem](https://gpdsupport.com/letter_avatar_proxy/v4/letter/p/9e8a1a/32.png) [@petem](https://gpdsupport.com/u/petem)\
**Post date:** [October 9, 2019, 8:08pm UTC](https://gpdsupport.com/t/set-up-advice-for-blind-user/242/10 "2019-10-09T20:08:34Z")

</div>

@Frankie, I am personally running Bios 0.24 - It is stable from the limited testing I have done. However in terms of the fan noise. It is not greatly improved but perhaps slightly improved. There has been some work done by community forum members using a software modification which does improve the fan noise but it is not endorsed by GPD and requires a bit of technical knowledge to get it working.

If you wish to take a look at it its here: It is quite lengthy and some of the thread is related to Linux and not Windows configurations.

> [@\[FAN ISSUE\] Fan always on](https://gpdsupport.com/t/fan-issue-fan-always-on/107):
>
> Received my GPD P2 Max on Friday, setup went well and no BSODs observed. One thing though: the fan is always on, even when process manager shows 2% utilization and CPU clock is at 1.1 GHz. Have other people noticed this? Or is my unit defective?

I hope this helps.

---

_[View the full topic](https://gpdsupport.com/t/set-up-advice-for-blind-user/242)._