[SOLVED] Please upload anywhere .bin / .rom (binary image of firmware for GPD MicroPC about overheating fixing)

I can copy-paste “auto-helper” of afuefix64.efi that run whithout params.

fs1:\> afuefix64.efi

----------------------------------------------------------------------------
             AMI Firmware Update Utility  v5.11.06.1854                     
                              APL Normal Mode                               
   Copyright  (C) 2018 American Megatrends Inc. All Rights Reserved       
----------------------------------------------------------------------------
 Usage: AfuEfix64.efi <ROM File Name> [Option 1] [Option 2]...  
              or
       AfuEfix64.efi <Input or Output File Name> <Command>
              or
       AfuEfix64.efi <Command>
-----------------------------------------------------------------------------
 Commands:
    /O - Save current ROM image to file
    /U - Display ROM File's ROMID
    /S - Refer to Options: /S
    /D - Verification test of given ROM File without flashing BIOS
    /A: - Refer to Options: /A:
    /OAD - Refer to Options: /OAD
    /CLNEVNLOG - Refer to Options: /CLNEVNLOG

Options:
    /CMD: - Send special command to BIOS. /CMD:{xxx}
    /OEMCMD: - Send special value to BIOS. /OEMCMD:xxx
    /DPC - Do not Check Aptio 4 and Aptio 5 platforms
    /PW: - Input password for file
    /Q - Silent execution
    /X - Do not Check ROM ID
    /S - Display current system ROMID
    /JBC - Do not check AC adapter and battery
    /HOLEOUT: - Save specific ROM Hole according to RomHole GUID.
                NewRomHole1.BIN /HOLEOUT:GUID
    /SP - Preserve Setup settings.
    /R - Preserve ALL SMBIOS structure during programming
    /Rn - Preserve SMBIOS type N during programming (n=0-255)
    /P - Program Main BIOS
    /N - Program NVRAM
    /K - Program all non-critical blocks
    /Kn - Program n non-critical blocks (n=0-15)
    /RLC: - To set default option for Rom layout change. (E:Entire ROM, A:Abort, F:Force)
    /CLRCFG - Program without preseving setup configuration
    /BCPALL - Save all question values before flash
    /HOLE: - Update specific ROM Hole according to RomHole GUID.
             NewRomHole1.BIN /HOLE:GUID
    /L - Program all ROM Holes.
    /Ln - Program n ROM Hole only (n=0-15)
    /E - Program Embedded Controller Block
    /A: - Oem Activation File
    /OAD - Delete Oem Activation key
    /CLNEVNLOG - Clear Event log
    /CAPSULE - Override Secure Flash policy to Capsule
    /RECOVERY - Override Secure Flash policy to Recovery
    /REBOOT - Reboot after programming
    /SHUTDOWN - Shutdown after program

-------------------------------------------------------